Parquetry is a beautiful look for your floors that adds instant character to any room. It's not difficult to install, but if you want it to look professional and seamless, there are a few simple tips you need to follow. 

If you're thinking about installing parquetry flooring Adelaide in your home or office building, here are five tips and tricks on how to make sure the job comes out looking great:

Parquetry Flooring 

Parquetry is a type of flooring that's made up of small pieces of wood. It can come in many different patterns and colours, but it's usually used in high-end homes because it looks nice and expensive. 

Parquet is also sometimes called parquet. Parquet floors were first popularised during the Renaissance period as an alternative to stone floors that were difficult to maintain due to moisture damage from flooding or poor drainage systems.

  1. Use squares instead of triangles

When you're cutting your parquet flooring, it's best to use squares instead of triangles. A square will be easier to cut and work with than a triangle because it has fewer angles that need to be sanded down before installation. 

  1. Work from the centre outward

Work from the centre outwards. When installing parquetry flooring Adelaide, it's best to work from the middle of your room outward rather than starting with one side and working toward another. 

This will ensure that you don't get any gaps in between boards or have too much space between them on either side of an area where you've installed flooring before moving onto another section of your home or office space.

  1. Leave gaps for air to circulate

If you're installing a parquetry floor and don't leave gaps, the wood will warp and crack. This is because it needs to breathe. This can be avoided by using spacers to create gaps between each piece of wood, or by using a damp cloth to remove any excess glue before it dries.

  1. Make sure you've got a good base

A good base is the foundation of your floor. If it's not up to scratch, then all your hard work will be for nothing.

The best way to check if your base is good is by tapping it with a hammer or mallet. If there's no sound at all and no movement in the board, then it means there's no space for moisture between your subfloor and underlayment (if applicable) - which means that water won't get trapped in between them and cause damage over time.

If this happens during installation, don't panic! You just need some small nails or screws with large heads so you can get into those cracks more easily before applying glue down below again.

  1. Allow for expansion and contraction

Allow for expansion and contraction. Parquetry is made up of many different pieces, each one with its own size, shape and orientation. As a result, your floor will expand and contract as the temperature changes throughout the year. This can cause cracking or warping if you don't take measures to ensure that your parquet stays in good shape over time.


Hopefully, these tips will help you to install your parquetry flooring Adelaide with a professional finish. If you're looking for more advice on how to install a quality floor, you can seek help from professionals!