Users of Canon printing equipment frequently look up "how to connect a Canon Pixma TS3322 to wifi" online. This guide will provide you with all the necessary detailed instructions if you need help connecting your Canon Pixma TS3322 printer to your wifi network. (cableless setup).

An Overview of Canon Pixma TS3322 WiFi Setup

Internet searches for "How To Scan On Canon Ts3322 Printer" instructions are common among users of Canon printing equipment. This guide will provide you with all the precise instructions you need to connect your Canon Pixma TS3322 printer to your wifi network. (cableless setup).

  • On your printer, launch the Easy Wireless Connect application.
  • To update the drivers and software for your printer, download and run the setup file.

What Steps Do I Need To Take To Install A Canon TS3322 Printer On Windows?

Start the Easy Wireless Connect procedure on your Canon printer before beginning setup on your PC. then complete configuring the computer. The full setup instructions for Simple Wireless Connect are provided below:

Step 1: Installing Your Canon TS3322 Printer for a Simple Wireless

  • The Direct button (A) on your printer needs to be depressed and held down. Release control of the button after the (B) light appears.
  • Verify that the horizontal lines (C) and the network symbol are flashing right now.

Step 2: Obtain and execute the installation file for the printer driver.

Make sure the horizontal bar (C) and network indicator flash. Please follow the instructions below to obtain and configure the printer software for the setup file:

  • To start your setup program, select Start Setup.
  • After carefully reading the Network Security notice, select Next.
  • Read the licence agreement after that. Select Agree after that to proceed. The installation process will end if you select No.
  • Next, decide if you agree with the information request or disagree.
  • This notice will show up if you choose "Don't Agree."
  • To confirm your selection of a wireless connection at this point, select Yes.
  • The screens below can be seen. Choose an SSID network that supports 2.4 GHz from the drop-down menu. Check the instructions for your network. On the following screen, type your password after selecting the SSID network.
  • Once the connection is established, click Next.
  • The next step is to click.
  • Click Proceed Online to begin the download and installation of any extra driver software.

The procedure for connecting a Canon TS3322 printer to wifi on a Windows computer is described above.


Also Read: Canon Pixma iX6820